4. Task by yourself – „Gift Yourself a Trophy“

Step 1: Create the Base

• Insert a red box from the Basic Shapes Library.
• Adjust its dimensions:
  • Length: 100 mm
  • Width: 100 mm
  • Height: 30 mm

^{Figure 21. Modeling the Base}

Step 2: Add the First Ring

• Insert a ring shape.
• Set its dimensions:
  • Length: 40 mm
  • Width: 40 mm
• Align it in the center of the red base.

^{Figure 22. Base Ring Placement}

Step 3: Create the Trophy Stem

• Insert a cylinder.
• Adjust its dimensions:
  • Length: 30 mm
  • Width: 30 mm
  • Height: 100 mm
• Place it on top of the base inside the ring.

^{Figure 23. Forming the Trophy Stem}

Step 4: Add the Second Ring

• Insert a blue ring.
• Adjust its dimensions:
  • Length: 50 mm
  • Width: 50 mm
  • Height: 30 mm
• Position it on the cylinder, 80 mm from the ground.

^{Figure 24. Adding the Second Ring}

Step 5: Create the Trophy Cup

• Insert a half-sphere and rotate it 180°.
• Adjust its dimensions:
  • Length: 100 mm
  • Width: 100 mm
  • Height: 50 mm
• Place it on top of the cylinder, 96 mm from the ground.

^{Figure 25. A hemisphere loaded and rotated 180 degrees}

 View from Above:

^{Figure 26. Cup viewed from above}

View from Front: 

Figure 27. Cup viewed from front

Step 6: Hollow Out the Cup

• Copy the half-sphere using CTRL+C -> CTRL+V.
• Adjust the copied half-sphere’s size:
  • Length: 80 mm
  • Width: 80 mm
• Position it inside the larger half-sphere.
• Change the material to "HOLE" to create an empty space.

^{Figure 28. Creating the Inner Half-Sphere by Copying the Outer Half-Sphere}

^{Figure 29: Changing the Inner Half-Sphere Material}

 

Step 7: Add a Nameplate

• Insert a text object and write your name.

^{Figure 30. Creating Raised Letters}

• Rotate the text 90°.

^{Figure 31. Rotating Text 90°}

• Resize the text to fit on the side of the red base.
• Move and embed it slightly into the box.

^{Figure 32. Positioning the Name on the Base}

Step 8: Finalizing the Model

• Select all objects and group them together.

^{Figure 33. Grouping All Components}

Step 9: Export for 3D Printing

• Click "Export" and choose ".STL" format.

• Save the STL file to your computer.

The trophy is now ready for 3D printing! 🏆

^{Figure 34. Exporting the Model}